Extending Schedules; Area Schedules - Security Command Executive XR200 User Manual

Schedules
continued

Area Schedules

Your system may be programmed for Area schedules that allows
you to set a separate schedule for each area of the system. If so,
after selecting the schedule type (PRM, PRI, SEC, or TMP) the
keypad displays AREA NO: –. Enter the number of the area you
want to enter schedules. Press COMMAND to continue.
You can also press either of the two left SELECT keys to browse
through a list of the areas. Press COMMAND when the area name
you want is displayed.
All/Perimeter or Home/Away systems: Your system may be
programmed for Area schedules that allows you to set a separate
schedule for just the perimeter or interior of the system. If so, after
selecting the schedule type (PRM, PRI, SEC, or TMP) the keypad
displays INT PERIM. Press the SELECT key under INT to program
a schedule for just the interior of your system. Press the SELECT
key under PERIM to program a schedule for just the perimeter.
24
User Menu
Schedules
continued
Area Schedules
Your system may be programmed for Area schedules that allows
you to set a separate schedule for each area of the system. If so,
after selecting the schedule type (PRM, PRI, SEC, or TMP) the
keypad displays AREA NO: –. Enter the number of the area you
want to enter schedules. Press COMMAND to continue.
You can also press either of the two left SELECT keys to browse
through a list of the areas. Press COMMAND when the area name
iyou want is displayed.
All/Perimeter or Home/Away systems: Your system may be
programmed for Area schedules that allows you to set a separate
schedule for just the perimeter or interior of the system. If so, after
selecting the schedule type (PRM, PRI, SEC, or TMP) the keypad
displays INT PERIM. Press the SELECT key under INT to program
a schedule for just the interior of your system. Press the SELECT
key under PERIM to program a schedule for just the perimeter.
24 User Menu

Extending Schedules

User Code Level: 6 and above.
Depending on your system's programming, when the schedule
expires (the ON time) you can extend the schedule to a later time.
The keypad buzzer sounds and the keypad displays "area name"
and LATE or CLOSING TIME!. This reminds users still on the
premises to arm the system or extend the schedule.
To extend the system's schedule:
1. Press any SELECT key and the keypad will display ENTER
CODE:-.
2. Enter your code and press COMMAND. The system's schedule
is automatically extended one hour.
3. The keypad then displays -: AM PM. You can enter a time to
extend the schedule for greater than one hour. Press AM or PM.
Note: If the system is not armed, or the schedule extended, a
report is sent to the central station.
Extending Schedules
User Code Level: 6 and above.
Depending on your system's programming, when the schedule
expires (the ON time) you can extend the schedule to a later time.
The keypad buzzer sounds and the keypad displays "area name"
and LATE or CLOSING TIME!. This reminds users still on the
premises to arm the system or extend the schedule.
To extend the system's schedule:
1. Press any SELECT key and the keypad will display ENTER
CODE:-.
2. Enter your code and press COMMAND. The system's schedule
is automatically extended one hour.
3. The keypad then displays -: AM PM. You can enter a time to
extend the schedule for greater than one hour. Press AM or PM.
Note: If the system is not armed, or the schedule extended, a
report is sent to the central station.