Install The Access Point; Verify The Ap560H Box Contents - Extreme Networks ExtremeWireless AP560h Installation Manual

Install the Access Point

Verify the AP560h Box Contents

Access Point Bracket Usage and Mounting Options
Install the Access Point on a Wall
Install the Access Point on a Pole
About This Task
The access point is installed on a flat surface such as a wall and to a pole using brackets and accessories.
Refer to the
your installation needs.
Note
The access point cannot be installed directly on a wall or to a pole without the mounting
bracket.
When you receive the access point bundle, perform a visual inspection of the access point, the bracket,
and the accessories for any physical damage.
Contact Extreme Networks Support
Before installing the access point:
Procedure
1. Verify the box
2. Review the
Verify the AP560h Box Contents
About This Task
The box contains the access point and a removable label for your documentation. There is another label
that mentions the minimum base firmware version that the product needs to have.
The box contents of the access point and the access point bundle are listed below:
purchase order information
in case of any damage.
contents.
safety guidelines.
on page 13
on page 14
on page 15
on page 22
to know more about picking the right access point bundle for
ExtremeWireless™ AP560h Access Point 13