Install The Access Point; Access Point And Accessory Box Contents And Order Information; Access Point Box Contents - Extreme Networks ExtremeWireless AP460C Installation Manual

Install the Access Point

Access Point and Accessory Box Contents and Order Information

Access Point Mounting Options and Accessory Usage
Install the Access Point on a Vertical Pole or a Horizontal Pole
Install the Access Point on a Flat Surface
About This Task
The access point can be installed on an outdoor environment on a vertical or horizontal pole, or to a flat
surface. For more information about selecting the right access point for your installation needs, see
Access Point and Accessory Box Contents and Order Information
Note
The installation procedure for AP460C, AP460S6C, and AP460S12C access points are similar.
The installation procedures covered in this document is applicable to all these access points.
Procedure
1. Verify the
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact
3. Read and review the
Access Point and Accessory Box Contents and Order Information

Access point box contents

When you purchase the access point, ensure that the following items are available in the box:
•
An access point you have ordered (AP460C, or AP460S6C, or AP460S12C) with two installed M20
cable gland assemblies and plugs, and two installed M25 seal caps
•
Hardware bag containing grounding hardware:
◦ M4 ground screw
box contents.
Extreme Networks
safety guidelines.
Tip
For best performance, deploy devices in open areas at least 100.0 ft. (30.5 m) apart from
each other.
ExtremeWireless™ AP460C, AP460S6C, and AP460S12C Access Points
on page 17
on page 17
on page 20
on page 15.
Support.
on page 15
15