Install The Access Point; Ap410I/E Box Contents - Extreme Networks ExtremeWireless AP410i Installation Manual

Install the Access Point

AP410i/e Box Contents

Access Point Installation Options and Accessory Information
Install the Access Point on Drywall or Wood Wall, or to a Solid Flat Ceiling
on page 14
Install the Access Point on a Suspended Ceiling or a Drop Ceiling with a Flat T-
bar on page 20
Install the Access Point on a Junction Box or Gang Box
Install the Access Point on a Beam
About This Task
The access point is installed on flat surfaces such as drywall or wood wall, solid flat ceiling, suspended
or drop ceiling with T-bar, to beams, or to a junction or gang box. Optional adapters and brackets are
available for mounting the access point to non-flat ceiling tiles and T-bars.
See purchase order information
Before installing the access point:
Procedure
1. Verify the
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact
3. Read and review the
AP410i/e Box Contents
When you purchase the AP410i or AP410e access point, ensure that the following items are available in
the box:
•
An AP410i/e Quick Reference
•
One access point (AP410i or AP410e)
•
A stainless-steel mounting bracket for 802.11ax indoor access point
12 ExtremeWireless™ Access Points AP410i/e
on page 12
for details on access points and optional brackets part numbers.
box contents.
Extreme Networks
safety guidelines.
on page 26
on page 28
Support.
on page 13