Table of Contents
Advertisement
Charging the Battery Pack
1
Connect AC Charger to Handset and plug into an
AC outlet
Inscription on the AC Charger Connector should face up.
Charging Indicator lights red and goes out when charging is complete.
2
Disconnect AC Charger from the AC outlet and
then from Handset
Press and hold Release Buttons to remove AC Charger from Handset.
Note
AC Charger supports a power supply of 100 to 240 V AC.
7
The plug of AC Charger can only be used in Japan.
7
Basic Operations
Turning Handset Power On
1
Press and hold O
Turning Handset Power Off
1
Press and hold O
Retrieving Network Information
Before using Yahoo! Keitai, Messaging or S! Appli, retrieve the network
connection information. The fi rst time you press @ , J , K or Q after
purchasing your handset, a prompt appears.
1
In standby mode, press @ , J , K or Q
2
Select YES and press @
A network connection is established and the network information is
retrieved.
24
24-27
Advertisement
Table of Contents
