Defining Snmp Groups - NETGEAR FS728TS User Manual

Defining SNMP Groups

The Groups Page provides information for creating SNMP groups and assigning SNMP access control privileges to SNMP groups. Groups allow
network managers to assign access rights to specific device features or feature aspects.
To define an SNMP group:
1. Click Advanced SNMP > Groups. The Groups Page opens:
The Groups Page contains the following fields:
•
ID – Indicates the stacking number
•
Group Name — Displays the user-defined group to which access control rules are applied. The field range is up to 30 characters.
•
Security Model — Defines the SNMP version attached to the group. The possible field values are:
SNMPv1 — SNMPv1 is defined for the group.
–
SNMPv2c — SNMPv2c is defined for the group.
–
SNMPv3 — SNMPv3 is defined for the group.
–
•
Security Level — Defines the security level attached to the group. Security levels apply to SNMPv3 only. The possible field values are:
Figure 5 - 51: Groups Page
Page 90