Display The Multicast Groups In Your Network - NETGEAR AV Series User Manual

The Multicast page displays.
5. From the Multicast Block Addresses menu, select one or more ranges to block or
unblock:
• Individual multicast address ranges: Click the Network Ranges text (not the
check box) and select or clear one or more check boxes for individual network
ranges.
• All multicast network ranges: Select or clear the Network Ranges check box.
6. Click the Apply button.
Your settings are saved.
7. To save the settings to the running configuration, at the top of the page, click the
Save icon or text.

Display the multicast groups in your network

The switch automatically detects the multicast groups in your network.
To display the multicast groups in your network:
1. Launch a web browser.
2. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
3. In the Login Name field, enter admin as the user name, in the Password field, enter
your local device password, and click the AV UI Login button.
The first time that you log in, no password is required. However, you then must
specify a local device password to use each subsequent time that you log in.
The Overview page displays.
4. Select Configure > Multicast.
The Multicast page displays.
The Multicast Groups table displays detailed information about each multicast group
in your network.
Multicast
AV Line of Fully Managed Switches M4250 Series
44 Audio Video User Manual