Configuring Snmp Security - NETGEAR FS728TS User Manual

Configuring SNMP Security

Simple Network Management Protocol (SNMP) provides a method for managing network devices. The device supports the following SNMP
versions:
•
SNMP v1 and v2c
•
SNMP version 3
The SNMP agents maintain a list of variables that are used to manage the device. The variables are defined in the Management Information Base
(MIB). The SNMP agent defines the MIB specification format, as well as the format used to access the information over the network. Access strings
control access rights to the SNMP agents.
SNMP v3 applies access control and a new traps mechanism. In addition, User Security Model (USM) parameters are defined for SNMPv3,
including:
•
Authentication — Provides data integrity and data origin authentication.
•
Privacy — Protects against the disclosure of message content. Cipher Block-Chaining (CBC) is used for encryption. Either
authentication is enabled on an SNMP message, or both authentication and privacy are enabled on an SNMP message. However,
privacy cannot be enabled without authentication.
•
Timeliness — Protects against message delay or message redundancy. The SNMP agent compares the incoming message to the
message time information.
•
Key Management — Defines key generation, key updates, and key use.
The device supports SNMP notification filters based on Object IDs (OIDs). OIDs are used by the system to manage device features.
SNMP v3 supports the following features:
•
Security
•
Feature Access Control
•
Traps
The device generates copy traps.
This section contains the following topics:
•
Defining SNMP Engine ID
•
Defining SNMP Users
•
Defining SNMP Views
•
Defining SNMP Communities
•
Trap Station Management
•
Global Trap Settings
•
Trap Filter Settings
Page 86