NETGEAR FS728TS User Manual page 58

•
The device supports up to eight LAGs with eight ports in each LAG.
This section includes the following sections:
•
Aggregating Ports
•
Defining LAG Membership
Aggregating Ports
The LAG Settings Page contains fields for configuring parameters for configured LAGs. The system supports 8 LAGs, and each LAG can contain
up to 8 ports.
To define LAG parameters:
1. Click LAG Configuration- > LAG Settings. The LAG Settings Page opens.
The LAG Settings Page contains the following fields:
•
Interface — Displays the LAG number.
•
LAG Description — Displays the user-defined port name.
•
Link Status — Displays the link operational status. The possible field values are:
UP — Indicates the LAG is currently linked and forwarding traffic.
–
Down — Indicates the LAG is currently not linked.
–
•
LAG Speed — Displays the configured rate for the LAG. The port type determines what speed setting options are available. LAG speeds can
only be configured when auto negotiation is disabled. The possible field values are:
10 — Indicates the LAG is currently operating at 10 Mbps.
–
Figure 5 - 26: LAG Settings Page
Page 58