Global Trap Settings - NETGEAR FS728TS User Manual

Global Trap Settings

The Global Trap Settings Page contains parameters for defining SNMP notification parameters. To define SNMP notification global parameters:
1. Click Advanced > SNMP > Global Trap Settings. The Global Trap Settings Page opens:
The Global Trap Settings Page contains the following fields:
•
SNMP Notifications — Specifies whether the device can send SNMP notifications. The possible field values are:
Enable — Enables SNMP notifications.
–
Disable — Disables SNMP notifications.
–
•
Authentication Notifications — Specifies whether SNMP authentication failure notification is enabled on the device. The possible field
values are:
Enable — Enables the device to send authentication failure notifications.
–
Disable — Disables the device from sending authentication failure notifications.
–
2. Define the SNMP Notification and Authentication Notifications fields.
3. Click . The SNMP notification properties are defined and the device is updated.
Figure 5 - 61: Global Trap Settings Page
Page 102