•
Type — Indicates the port mode configuration for port mirroring. The possible field values are:
RX — Defines the port mirroring on receiving ports.
–
TX — Defines the port mirroring on transmitting ports.
–
Both — Defines the port mirroring on both receiving and transmitting ports. This is the default value.
–
•
Status — Indicates if the port is currently monitored. The possible field values are:
Active — Indicates the port is currently monitored.
–
Ready — Indicates the port is not currently monitored.
–
•
Delete — Removes the port mirroring session. The possible field values are:
Checked — Removes the selected port mirroring sessions.
–
Unchecked — Maintains the port mirroring session.
–
2.
Click
The Add Port Mirroring Page opens:
.
3.
Select a port in the Source Port field.
4.
Select a port type in the Type field.
5.
Click
. The port mirroring session is defined and the device is updated.
Figure 5 - 67: Add Port Mirroring Page
Page 108