Defining Qos Queues - NETGEAR FS728TS User Manual

Defining QoS Queues

The Defining QoS Queues Page contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click QoS > General > Queue. The Queue Page opens.
The Queue Page contains the following fields:
•
Strict Priority — Specifies whether traffic scheduling is based strictly on the queue priority.
•
WRR — Assigns WRR weights to queues. This field is enabled only for queues in WRR queue mode.
2. Select Strict Priority or WRR Fields.
3. Click . The queue settings are set and the device is updated.
Figure 5 - 43: Queue Page
Page 81