NETGEAR FS728TS User Manual page 89

Remote — Indicates that the user is connected to a remote SNMP entity. If the Engine ID is defined, remote devices receive inform
–
messages.
•
Authentication — Displays the method used to authenticate users. The possible field values are:
MD5 Key — Users are authenticated using the HMAC-MD5 algorithm.
–
SHA Key — Users are authenticated using the HMAC-SHA-96 authentication level.
–
MD5 Password — The HMAC-MD5-96 password is used for authentication. The user should enter a password.
–
SHA Password — Users are authenticated using the HMAC-SHA-96 authentication level. The user should enter a password.
–
No Authentication — No user authentication is used.
–
•
Delete — Removes users from a specified group. The possible field values are:
Checked — Removes the selected user.
–
Unchecked — Maintains the list of users.
–
2. Click . The Add SNMP Users Page opens:
3. Define the fields.
4. Click . The SNMP user is defined and the device is updated.
Figure 5 - 50: Add SNMP Users Page
Page 89