Trap Filter Settings - NETGEAR FS728TS User Manual

Trap Filter Settings

The Trap Filter Settings Page permits filtering traps based on OIDs. Each OID is linked to a device feature or a portion of a feature. The Trap Filter
Settings Page also allows network managers to filter notifications.
To define SNMP Trap Filter settings:
1. Click Advanced > SNMP > Trap Filter Settings. The Trap Filter Settings Page opens:
The
Trap Filter Settings Page contains
•
Filter Name — Contains a list of user-defined notification filters.
•
ID — Indicates the Trap Filter Settings Table entry number.
•
Object Identifier Subtree — Displays the OID for which notifications are sent or blocked. If a filter is attached to an OID, traps or informs are
generated and sent to the trap recipients. OIDs are selected from either the Select from field or the Object ID field.
•
Filter Type — Indicates whether to send traps or informs relating to the selected OID.
Excluded — Does not send traps or informs.
–
Included — Sends traps or informs.
–
•
Delete — The possible field values are:
Figure 5 - 62: Trap Filter Settings Page
the following fields:
Page 103