NETGEAR FS728TS User Manual page 123

•
Rising Threshold — Displays the rising counter value that triggers the rising threshold alarm. The rising threshold is presented on top of the
graph bars. Each monitored variable is designated a color.
•
Rising Event — Displays the mechanism in which the alarms are reported. The possible field values are:
LOG — Indicates there is not a saving mechanism for either the device or in the management system. If the device is not reset, the entry
–
remains in the Log Table.
TRAP — Indicates that an SNMP trap is generated and sent via the Trap mechanism. The Trap can also be saved using the Trap
–
mechanism.
Both — Indicates that both the Log and Trap mechanism are used to report alarms.
–
•
Falling Threshold — Displays the falling counter value that triggers the falling threshold alarm. The falling threshold is graphically presented
on top of the graph bars. Each monitored variable is designated a color.
•
Falling Event — Displays the mechanism in which the alarms are reported.
•
Startup Alarm — Displays the trigger that activates the alarm generation. Rising is defined by crossing the threshold from a low-value
threshold to a higher-value threshold.
•
Interval — Defines the alarm interval time in seconds.
•
Owner — Displays the device or user that defined the alarm.
•
Delete — Removes the RMON Alarms Table entry.
2. Click . The Add Alarm Page opens:
3. Define the fields.
4. Click . The RMON alarm is added and the device is updated.
Figure 5 - 78: Add Alarm Page
Page 123