Viewing The Device Status - NETGEAR FS728TS User Manual

Viewing the Device Status

The Switch Status Page contains parameters for configuring general device information, including the system name, location, contact, the system
MAC Address, System Object ID, System Up Time and MAC addresses, and both software and hardware versions.
1. Click Switch Status. The Switch Status Page opens.
The Switch Status Page contains the following fields:
•
Model Name — Displays the device model number and name.
•
System Name — Defines the user-defined device name. The field may contain is 0-160 characters.
•
System Location — Defines the location where the system is currently running. The field may contain is 0-160 characters.
•
System Contact — Defines the name of the contact person. The field may contain is 0-160 characters.
•
System Object ID — Displays the vendor's authoritative identification of the network management subsystem contained in the entity.
•
Date — Displays the current date.
•
Local Time — Displays the Local time.
•
System Up Time — Displays the amount of time since the most recent device reset. The system time is displayed in the following format:
Days, Hours, Minutes, and Seconds. For example, 41 days, 2 hours, 22 minutes and 15 seconds.
•
Base MAC Address — Displays the MAC address for each stacking unit.
•
Unit Mode — Indicates if the device is currently in stand-alone or stacking mode.
Figure 5 - 6: Switch Status Page
Page 27