NETGEAR FS728TS User Manual page 59

100 — Indicates the LAG is currently operating at 100 Mbps.
–
1000 — Indicates the LAG is currently operating at 1000 Mbps.
–
•
Auto Negotiation — Displays the auto negotiation status on the LAG. Auto negotiation is a protocol between two link partners that enables a
port to advertise its transmission rate, duplex mode, and flow control abilities to its partner.
•
Flow Control — Displays the flow control status on the LAG. Operates when the port is in full duplex mode. Enabled by default.
2. Click a LAG. The Modify LAG Settings Page opens:
In addition to the fields in the LAG Settings Page, the Modify LAG Settings Page contains the following additional fields:
•
Current Auto Negotiation — The current Auto Negotiation setting. Auto negation of Flow Control (FC) is enabled by default.
•
Admin Advertisement — Defines the auto-negotiation setting the port advertises. The possible field values are:
Max Capability — Indicates that all port speeds and Duplex mode settings are accepted.
–
10 Half — Indicates that the port advertises for a 10 mbps speed port and half duplex mode setting.
–
10 Full — Indicates that the port advertises for a 10 mbps speed port and full duplex mode setting.
–
100 Half — Indicates that the port advertises for a 100 mbps speed port and half duplex mode setting.
–
100 Full — Indicates that the port advertises for a 100 mbps speed port and full duplex mode setting.
–
1000 Full — Indicates that the port advertises for a 1000 mbps speed port and full duplex mode setting.
–
•
Current Advertisement — The port advertises its speed to its neighbor port to start the negotiation process. The possible field values are
those specified in the Admin Advertisement field.
Figure 5 - 27: Modify LAG Settings Page
Page 59