CHAPTER 3:
The application software for the FS700TS-series switch is upgradeable, enabling your switch to take advantage of improvements and additional
features as they become available. The upgrade procedure and the required equipment are described in the following section.
The upgrade procedure is as follows:
1.
Save the new firmware to your computer.
2.
Start the Smart Wizard Discovery Utility program.
3.
Select your switch by clicking on it. Then click on Firmware Upgrade, as highlighted in Figure 3-1.
Figure 3 - 1: Select the Switch you Want to Upgrade and Click Firmware Upgrade
SOFTWARE UPGRADE PROCEDURE
Page 11