•
IP Address — Indicates the station IP address, which is associated with the MAC address filled in below.
•
MAC Address — Displays the station MAC address that is associated in the ARP table with the IP address.
•
Status — Displays the ARP table entry type. Possible field values are:
Dynamic — Indicates the ARP entry is learned dynamically.
–
Static — Indicates the ARP entry is a static entry.
–
•
Delete — Removes a specific ARP entry. The possible field values are:
Checked — Removes the selected ARP entries.
–
Unchecked — Maintains the current ARP entries.
–
2.
Define the fields.
3.
Click
. The ARP parameters are defined and the device is updated.
To create a new ARP entry:
1.
Click IP Addressing > ARP. The ARP Page opens.
2.
Click
. The Add ARP Page opens:
3.
Define the fields.
4.
Click
. The ARP interface is added and the device is updated.
Figure 5 - 36: Add ARP Page
Page 69