NETGEAR FS728TS User Manual page 65

•
Include — Includes the port in the VLAN.
•
Exclude — Excludes the interface from the VLAN.
•
Forbidden — Denies the interface VLAN membership.
2. Define the fields.
3. Click . The VLAN Membership is defined and the device is updated.
Defining VLAN PVID Settings
The Interface PVID Settings Page contains parameters for assigning Port VLAN ID (PVID) values to interfaces. All ports must have a defined PVID.
If no other value is configured the default VLAN PVID is used. VLAN number 1 is the default VLAN and cannot be deleted from the system.
To open the Interface PVID Settings Page:
1. Click Switch > VLAN > Interface PVID Settings. The Interface PVID Settings Page opens:
The Interface PVID Settings Page contains the following fields:
•
Unit No. — Displays the stacking member for which the PVID information is displayed.
•
Interface — Displays the interface to which the PVID tag is assigned. The possible field values are:
Port —Displays the port to which the PVID tag is attached.
–
LAG— Displays the LAG to which the PVID tag is attached.
–
•
PVID — Displays the PVID value. The possible field range is 1-4094.
Figure 5 - 33: Interface PVID Settings Page
Page 65