•
Interface — Displays the interface to which the entry refers:
•
Status — Displays how the entry was created. The possible field values are:
Secure — The MAC Address is defined for locked ports.
–
Permanent — The MAC address is permanent.
–
Delete on Reset — The MAC address is deleted when the device is reset.
–
Delete on Timeout — The MAC address is deleted when a timeout occurs.
–
•
Delete — Removes the entry. The possible field values are:
Checked — Removes the selected entry.
–
Unchecked — Maintains the current static forwarding database.
–
To prevent static MAC addresses from being deleted when the device is reset, ensure the port attached to the MAC address is locked.
To add a new static address entry:
1.
Click Address Table > Static Addresses. The Static Addresses Page opens.
2.
Click
. The Add Static Addresses Page opens:
3.
Define the fields.
4.
Click
. The forwarding database information is modified and the device is updated.
Defining Dynamic Addresses
Figure 5 - 38: Add Static Addresses Page
Page 71