Mapping Dscp Values To Queues - NETGEAR FS728TS User Manual

Mapping DSCP Values to Queues

The DSCP to Queue Page contains fields for mapping DSCP settings to traffic queues. For example, a packet with a DSCP tag value of 3 can be
assigned to queue 2.
To map CoS values to queues:
1. Click QoS > General > Mapping > DSCP to Queue. The DSCP to Queue Page opens.
The DSCP to Queue Page contains the following fields:
•
DSCP In — Displays the incoming packet's DSCP value.
•
Queue — Specifies the traffic-forwarding queue to which the DSCP priority is mapped. Four traffic priority queues are supported.
2. Define the queue number in the Queue field next to the required DSCP value.
3. Click . The DSCP value is mapped to a queue and the device is updated.
Figure 5 - 47: DSCP to Queue Page
Page 85