NETGEAR FS728TS User Manual page 12

4. Enter the location of the new firmware in the Firmware path below Firmware setting. Alternatively, you can click Browse to locate the file.
Enter following path, tftp://{tftp address}/{file name}.
5. Click Start to download the new firmware file in non-volatile memory. The system software is automatically loaded to all stacking
members.
Note: Once the system finishes firmware upgrade process, the switch will automatically reboot. The Smart Wizard Discovery Utility determines the
success of the upgrade process based on the success of the system reboot.
Figure 3 - 2: Locate New Firmware
Figure 3 - 3: Enter Password and click Start
Page 12