Application "Primary Function; Primary Function - Application - ABB i-bus KNX Product Manual

11.4

Application "Primary function"

11.4.1

Primary function - Application

Options:
Inactive:
■
– Application is not active.
1-button switching:
■
– Application is active.
The application is used to fix the primary function of the device. The primary function is the first
function of the device that is carried out when the user presses button 1 or 2. The primary
function should be a function that the user would use when entering the room for example (e.g.
"switching the ceiling light").
When the application is active, a switching telegram is sent when the button is pressed or
released.
The following communication object is available:
"PF: switching"
■
Note
The following parameters can only be adjusted when the function "Primary
function" is set on "1-button switching".
The parameters for "Primary function" can be called up via general parameters .
Product manual 2CKA001473B9482
Description of application and parameters
Inactive
1-button switching
Application "Primary function"
│65