Signal Color Correction; Adjusting Color By Temperature; Adjusting Color Values Based On Gamma Function; Selecting The Color Correction Mode - Christie boxer 4K30 User Manual

Signal color correction

Adjust the video signal color as required.

Adjusting color by temperature

Adjust the color temperature as expressed in degrees Kelvin.
1. Select MENU > Image Settings > Color & Gamma.
2. Select Color Temperature.
3. Adjust the slider to change the light to warmer or cooler and select Enter.

Adjusting color values based on gamma function

The gamma function options adjust the color values of the inputted signal to give you a more detailed
picture.
1. Select MENU > Image Settings > Color & Gamma > Gamma Function.
2. Select the appropriate option:
• sRGB
• ITU-R BT-1886
• Power Law Function
• M-Series (Standard)
3. Select Enter.

Selecting the color correction mode

Select the color correction mode most suited to the input signal.
1. Select MENU > Image Settings > Color & Gamma > Color Correction Mode.
2. Select the adjustment most suited to the input signal:
• Max Drives—All color adjustments are turned off, allowing the projector to run at
maximum brightness.
• Color Temperature—Specify a color temperature between 3200 and 9300, expressed
in degrees Kelvin.
• HD Video—Set the output color to a specific standard value. Adjusts the colors red,
green, blue, and white.
• Custom—Select a user defined set of color adjustments.
3. Select Enter.

Correcting for ambient light

Ambient light is the natural light that occurs in the environment where the projector is located.
1. Select MENU > Image Settings > Color & Gamma > Ambient Light Correction.
2. Select Enter.
Boxer 4K30 User Manual
020-101777-03 Rev. 1 (11-2015)
Adjusting the image
20