Adjusting Color Values Based On Gamma Function; Selecting The Color Correction Mode; Correcting For Ambient Light - Christie Mirage HD25 User Manual

Adjusting color values based on gamma function

The gamma function options adjust the color values of the inputted signal to give you a more detailed
picture.
1. Select MENU > Image Settings > Color & Gamma > Gamma Function.
2. Select the appropriate option:
• Auto Detect
• sRGB
• ITU-R BT-1886
• HDR/PQ (SMPTE ST 2084)
• Power Law Function
• Classic
3. Select Enter.

Selecting the color correction mode

Select the color correction mode most suited to the input signal.
1. Select MENU > Image Settings > Color & Gamma > Color Correction Mode.
2. Select the adjustment most suited to the input signal:
• Auto Detect—Automatically detect the appropriate color correction mode, where possible.
• Max Drives—All color adjustments are turned off, allowing the projector to run at
maximum brightness.
• Color Temperature—Specify a color temperature between 3200 and 9300, expressed in
degrees Kelvin.
• HD Video—Set the output color to a specific standard value. Adjusts the colors red,
green, blue, and white.
• DCI P3—Set the DCI P3 (cinema) coloimetry with DCI white point.
• DCI P3 (D65)—Set the DCI P3 colorimetry with D65 white point.
• Custom—Select a user defined set of color adjustments.
3. Select Enter.

Correcting for ambient light

Ambient light is the natural light that occurs in the environment where the projector is located.
1. Select MENU > Image Settings > Color & Gamma > Ambient Light Correction.
2. Select Enter.
3. Use the right and left arrows to adjust how the image displays in conditions with ambient light.
4. To confirm your selection, select Enter.
Crimson User Guide–Mirage HD25, Mirage WU25, Crimson HD25, Crimson WU25
020-102649-01 Rev. 1 (04-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Adjusting the image
28