Passive - HP 6125G Command Reference Manual

has a link local address. For the configuration of link local addresses, see Layer 3—IP Services
Configuration Guide.
Description
Use open ipv6 to log in to the IPv6 FTP server in FTP client view.
At login, enter the username and password for accessing the FTP server. If your input is correct, the login
succeeds.
Related commands: close.
Examples
# Log in to the FTP server at 3000::200 in FTP client view.
<Sysname> ftp
[ftp] open ipv6 3000::200
Trying 3000::200 ...
Press CTRL+K to abort
Connected to 3000::200.
220 Welcome!
User(3000::200:(none)): MY_NAME
331 Please specify the password.
Password:
230 Login successful.

passive

Syntax
passive
undo passive
View
FTP client view
Default level
3: Manage level
Parameters
None
Description
Use passive to set the data transmission mode to passive.
Use undo passive to set the data transmission mode to active.
The default transmission mode is passive.
Data transmission modes fall into the passive mode and the active mode. In active mode, the FTP server
initiates a data connection request. In passive mode, the FTP client initiates a data connection request.
This command is mainly used in conjunction with a firewall to restrict FTP session establishment between
private and public network users.
Examples
# Set the data transmission mode to passive.
[ftp] passive
73