Filter Sign List - Mitsubishi Electric AE-200A Instruction Book

3-4-2. Filter Sign List

3-4-2-1. LCD
A list of units whose filter sign is turned on can be displayed.
Touch [Status List] in the menu bar, and then touch [Filter Sign].
Note: The [Controller] setting will appear (only on the AE-200's LCD) when the [System Exp] setting on the [Unit Info.] screen is set
to [Expand]. Switch the [Controller] setting between [AE200] and [Exp1] through [Exp4] to display the list for each AE-200,
AE-50, and EW-50 individually.
Controller
Select [AE] to display the list
for AE-200, and select [1],
[2], [3], or [4] to display the
list for each AE-50/EW-50.
Floor name or block name
Group Name
Unit address
Item
Number of units whose filter sign
is turned on
Floor name or block name
Group name
Unit address
Reset
All Reset
WT07982X03
The number of units whose filter sign is currently turned on will appear.
The name of the floor or the block that the unit whose filter sign is turned on belongs to will
appear.
Note: This area will be blank if the unit whose filter sign is turned on does not belong to any
floor or block.
The name of the group that the unit belongs to will appear.
The address of the unit whose filter sign is turned on will appear.
Note: When [1], [2], [3], or [4] is selected as [Controller], AE-50/EW-50 No. and unit address
will appear. (Example: 1-012)
Touch to reset each filter sign.
Note: Reset the filter sign after cleaning the filter.
Note: After the filter sign is reset, it takes up to an hour to clear the filter sign display on
the local remote controllers. (When the filter sign is reset from the local remote
controllers, it takes up to an hour to clear the filter sign display on the AE-200/AE-50's
LCD.)
Touch to reset all filter signs at once.
Note: Reset the filter signs after cleaning the filters.
Note: After the filter signs are reset, it takes up to an hour to clear the filter sign display on
the local remote controllers. (When the filter signs are reset from the local remote
controllers, it takes up to an hour to clear the filter sign display on the AE-200/AE-50's
LCD.)
46
Description
Number of units whose
filter sign is turned on
Reset
Touch to reset the filter sign.
All Reset
Touch to reset all filter signs
at once.