Table of Contents
Advertisement
4 Press
5 Press
Combined Measurement
The following figure shows a combined measurement configuration where a ratio
measurement is assigned in the upper measurement line of the lower display
window.
Figure 2-24
Procedure
Use the following procedure to set the combined measurement:
1 Press
2 Use the arrow keys to highlight the Combination function field.
3 Press
Keysight N432A User's Guide
to enter the selection.
to complete the setup and display the measurement results.
Combined measurement configuration
>
Meas Select
to display the Function pop-up list
up/down arrow key to highlight Combined.
Selected window/measurement
Function fields
to select the required window/measurement.
(Figure
2-23), and use the
73
2
Advertisement
Table of Contents
