1
A LAN reset needs to be performed to ensure that the password is reset to
NOTE
default. The LAN reset procedure is as given below:
– Press
– Press
– Press
When
You can change the password from the Configuring your N432A Power Meter
page as shown in
locate the Change Password parameter.
Figure 1-11
40
>
Remote Interfaces
to display the second page of the Remote I/F menu.
1 of 2
to reset the LAN settings to default.
LAN Reset
is pressed, it will also change the GPIB address to default.
LAN Reset
Figure
1-11. Scroll down the Parameter column until you
Changing the N432A LAN interface configuration
to display the Remote Interfaces screen.
Keysight N432A User's Guide