Table of Contents
Advertisement
2
Figure 2-19
Figure 2-20
6 If the current unit is dBm or dB, use the numeric keys to enter the required
7 Now, use the right arrow key to highlight the Max Power value field.
8 Press
9 Repeat Step 6 and press
The Limits setting can be disabled and re-enabled by selecting the Limits
NOTE
setting field.
70
Minimum limit pop-up
Meter minimum pop-up
value and press
dBm
to enter the required value and press
can modify the unit multiplier by pressing
Increment Multiplier
multiplier softkey above
to display the Maximum Limit pop-up (if the current unit is dBm
or dB) or the Meter Maximum pop-up (if the current unit is W or %).
or
. If the current unit is % or W, use the numeric keys
dB
%
or
Decrement Multiplier
Increment Multiplier
to exit the measurement setup screen.
or
,
,
respectively. You
mW μW nW
, followed by
1 of 2
. Press the corresponding unit
to enter your selection.
Keysight N432A User's Guide
Advertisement
Table of Contents
