Keysight Technologies N432A User Manual page 43

1 Right-click the IO Control icon of the Keysight IO Libraries Suite on the taskbar
2 In the Keysight Connection Expert window, click Add > LAN instrument on the
Figure 1-14
3 In the Add LAN Instruments dialog
4 Enter the Hostname or IP address of the power meter and click Test This VISA
5 Click OK. You will return to the Keysight Connection Expert window
Keysight N432A User's Guide
notification area, and select Keysight Connection Expert.
toolbar. An Add Instrument dialog will appear as shown below. Select the LAN
instrument and click OK.
Add instrument drop-down list
top of the dialog.
Address to verify if the power meter is properly connected.
(Figure 1-15). Your N432A is now successfully connected via the socket
connection.
(Figure 1-15), click Enter Address at the
1
43