Keysight Technologies N432A User Manual page 28

Thermistor power meter
Hide thumbs Also See for N432A:
Table of Contents

Advertisement

1
6 The blue highlight on the right of the window indicates the currently selected
7 The available softkey labels are displayed in these fields. Additionally, settings
8 This displays the measurement unit.
9 This displays the number of pages in the current menu. For example,
Figure 1-2
Figure 1-2
single numeric and analog mode.
10 The information in this field is displayed in two lines and depends on the
11 The upper window is configured to show a single numeric display.
12 This field displays the current bridge resistance value as an indicator with or
13 The lower window is configured to show an analog meter which displays the
28
measurement display line. This measurement line refers to the upper window/
upper measurement.
associated with the labeled function are displayed under the label. Softkey
labels that are grayed out cannot be selected.
1 of 2 indicates that there are two pages in the menu and the first page is
currently displayed. Pressing the softkey displays the next page, indicated by 2
of 2 (press the softkey again to display the previous menu page).
10
11
12
13
Single numeric and analog display
shows the default display format of two measurement windows in the
sensor calibration factor, sensor calibration and frequency-dependent offset
tables currently selected, and the measurement frequency.
without the thermistor sensor connected.
measurement result and the meter scaling.
14
15
Keysight N432A User's Guide

Advertisement

Table of Contents
loading

Table of Contents