Table of Contents
Advertisement
2
NOTE
You can also access the sensor calibration tables by pressing
and using the up/down arrow key to highlight the CF Table setting field and
pressing
Procedure
Use the following procedure to select a sensor calibration table:
1 Press
2 Use the up/down arrow key to highlight one of the 20 table titles and press
Figure 2-39
When no data is contained in the highlighted table, the
NOTE
(grayed out).
3 Press
4 The following figure shows the selected table.
86
to display the tables.
>
Tables
to highlight
Table
On
Sensor table selected
to complete the selection of the calibration factor table.
Done
>
Sensor Cal Tables
.
.
key is disabled
Table
Keysight N432A User's Guide
Offsets
>
Advertisement
Table of Contents
