Table of Contents
Advertisement
9 Press
Figure 2-32
10 Use the numeric keys to enter the power level you want to generate a
11 Press
The recorder output can be disabled and re-enabled by selecting the Rec setting field.
NOTE
The highest power you are going to measure is used to determine the value
which you should set for the recorder output maximum setting. For example, if
you are measuring a power less than 1 mW and greater than 100 mW, set the
recorder maximum value to 1 mW.
Table 2-3
Log
Linear
Log
Linear
Keysight N432A User's Guide
to display the Recorder Maximum pop-up.
Recorder Maximum pop-up
0 V
output in the Recorder Maximum pop-up, and press the corresponding
dc
unit softkey.
to exit the measurement setup screen.
Ranges of the recorder output setting
50 dBm
100 W
–10 dBm
100 mW
40 dBm
30 dBm
10 W
1 W
–20 dBm
–30 dBm
10 mW
1 mW
2
20 dBm
100 mW
–40 dBm
100 nW
79
Advertisement
Table of Contents
