Table of Contents
Advertisement
2
Operating Information
Combined Measurement
The following figure shows a combined measurement configuration where
a ratio measurement is assigned in the upper measurement line of the
lower display window.
Figure 2-24 Combined measurement configuration
Procedure
Use the following procedure to set the combined measurement:
1 Press
2 Use the arrow keys to highlight the Combination function field.
3 Press
4 Press
5 To select the measurement type of either ratio or difference, use the
6 Press
58
>
Meas Select
to display the Function pop- up list
the up/down arrow key to highlight Combined.
to enter the selection.
arrow keys to highlight the Feed1/Feed2 function field.
to display the Combination pop- up list, and use the
up/down arrow key to highlight the required measurement type.
Selected window/measurement
Function fields
to select the required window/measurement.
(Figure 2-
23), and use
N432A User's Guide
Advertisement
Table of Contents
