Table of Contents
Advertisement
Table 3-1
Error list
Exponent too large
– 123
A numeric parameter was found whose exponent was larger than 32000
Example: CAL:RCF 1E34000
Too many digits
– 124
A numeric parameter was found whose mantissa contained more than 255 digits, excluding leading
zeros
Numeric data not allowed
– 128
A numeric value was received within a command which does not accept a numeric value
Example: MEM:CLE 24
Invalid suffix
– 131
A suffix was incorrectly specified for a numeric parameter. You may have misspelled the suffix.
Example: SENS:FREQ 200KZ
Suffix too long
– 134
A suffix used contained more than 12 characters
Example: SENS:FREQ 2MHZZZZZZZZZZZ
Suffix not allowed
– 138
A suffix was received following a numeric parameter which does not accept a suffix
Example: INIT:CONT 0Hz
Character data not allowed
A discrete parameter was received but a character string or a numeric parameter was expected. Check
– 148
the list of parameters to verify that you have used a valid parameter type.
Example: MEM:CLE CUSTOM_1
Invalid string data
An invalid string was received. Check to see if you have enclosed the character string in single or double
– 151
quotes.
Example; MEM:CLE "CUSTOM_1
String data not allowed
A character string was received but is not allowed for the command. Check the list of parameters to
– 158
verify that you have used a valid parameter type.
Example: LIM:STAT 'ON'
Invalid block data
– 161
A block data element was expected but was invalid for some reason, for example, *DDT #15FET. The 5 in
the string indicates that five characters should follow, whereas in this example there are only three.
Keysight N432A User's Guide
3
119
Advertisement
Table of Contents
