Table of Contents
Advertisement
4
Introduction
This chapter details the N432A specifications and supplemental characteristics.
Specification definitions
There are two types of product specifications:
– Warranted specifications
– Characteristic specifications
Warranted specifications
Warranted specifications are covered by the product warranty and applied after a
30-minute warm-up. These specifications are valid over the N432A operating and
environmental ranges unless otherwise stated, and after performing zeroing.
Characteristic specifications
Supplemental characteristics which are specified in italics are intended to provide
information useful in applying to the N432A by giving typical, but non-warranted
performance parameters. These characteristics are specified in italics or denoted
as "typical", "nominal", or "approximate".
Characteristic information is representative of the product. In many cases, it may
also be supplemental to a warranted specification. Characteristic specifications
are not verified on all products. The types of characteristic specifications can be
placed in two groups:
– The first group of characteristic types describes 'attributes' common to all
130
products of a given model or option.
Examples of characteristics that describe 'attributes' are product weight and
50 W input Type-N connector. In these examples, the product weight is an
approximate value and the 50 W input is nominal. These two terms are most
widely used when describing 'attributes' of a product.
Keysight N432A User's Guide
Advertisement
Table of Contents
