Table of Contents
Advertisement
Figure 2-53
9 Once the screen is blanked, pressing any of the front panel keys will prompt
10 Upon an unsuccessful third attempt, you will need to wait for two hours with
Figure 2-54
If you have forgotten the 6-digit password and need to operate the N432A
NOTE
immediately, perform the Memory Erase operation. This operation will erase all
data stored in the N432A. Refer to
for more details.
Keysight N432A User's Guide
Password reconfirmation pop-up
you to enter the password to restore the display
allowed up to three attempts of password entry.
the N432A powered on before you can re-enter the password. You are then
allowed up to three attempts of password entry again. The whole cycle of
password entry will then be repeated.
Password required to restore display
(Figure
"Memory Erase/Secure Erase"
2-54). You are only
on page 107
105
2
Advertisement
Table of Contents
