Warm Start
The warm start feature allows you to retain the N432A current states and settings
upon power cycle or in the event of interrupted power. The warm start On/Off
feature is selectable via the front panel and SCPI. The default setting is On.
Warm start ON
All the current states and settings configured via the front panel or SCPI will be
saved. The N432A will be powered on with the states and settings before it was
powered off.
Warm start OFF
The N432A will be powered on with the default states and settings.
Procedure
Use the following steps to enable/disable the warm start feature.
1 Press
2 On the Service menu, press
Figure 2-61
Keysight N432A User's Guide
>
1 of 2
feature as shown below.
Warm start On/Off feature
and select
.
Service
to toggle On/Off the warm start
Warm Start
2
109