Quick Start Information - Keysight Technologies N778 B Series Getting Started Manual

1 Getting Started

Quick Start Information

12
This section demonstrates how to connect your instruments optically and
electrically for typical applications. They are intended as a quick start
information, although it is strongly recommended that you refer the User's
Guide (Part No. N7781-90001) prior to operating the instruments.
Each application supports different modes of operation, some of which
may require additional connections, which are described in the respective
application section of the User's Guide (Part No. N7781-90001).
Please install the polarizationNAVIGATOR™ software before you plug in
NOTE
the instrument(s) to the USB port of the PC! This ensures that the drivers
are available when you plug-in the instrument(s). If you have connected
the instrument(s) prior to software installation, you may have to delete
the instrument(s) manually from the Windows device manager. This does
not apply to the N7781BD or the N7788BD. It also does not apply to
instruments that are used with GPIB only.
Run the Configuration Wizard each time you connect additional
NOTE
instruments.
Keysight N778xB Getting Started Guide