Digitaliocontrol - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
Acquisition Control
Setting Range
Item
0: Off
ExposureModeOption 1: RCT
2: BurstTrigger

DigitalIOControl

Configure settings for digital input/output.
Related Topic: GPIO (Digital Input/Output Settings)
Digital IO Control Setting
Item Range
LineSelector
LineMode
0: False
LineInverter
1: True
0: False
LineStatus
1: True
Default Value
0: Off
Default
Value
Select the input/output to configure.
21: Line2 Opt Out1
24: Line5 Opt In1
21: Line2 Opt
53: Nand0 In1
-
Out1
54: Nand0 In2
55: Nand1 In1
56: Nand1 In2
63: TimestampReset
Display the input/output status (whether it is input or output).
0: Input (LineSelector=24,53,54,55,56)
- -
1: Output (LineSelector=21)
2: InternalConnection (LineSelector=63)
Enable/disable polarity inversion for the selected input signal or output signal.
0: False
Note: LineSelector=24,63 are fixed to "0".
0: False Display the status of the input signal or output signal (True: High, False: Low).
User Manual (Ver. Preliminary) - Setting List
Enables RCT mode or BurstTrigger mode.
Related Topic: RCT Mode,
Description
- 102 -
Description
Burst Trigger Mode