Burst Trigger Mode Usage Examples - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
The number of frames that can be acquired depends on the model and SensorDigitizationBits setting.
For example, if you are using GOX-5105C-PGE and
maximum number of frames that can be acquired is 32.
Note: The number of frames in the table below are fixed values, regardless of the ROI size.
GOX-5105MC-PGE
GOX-8105MC-PGE
GOX-12405MC-PGE
GOX-16205MC-PGE
GOX-20405MC-PGE
GOX-24505MC-PGE

Burst Trigger Mode Usage Examples

Burst Trigger Mode usage examples are shown below:
Example 1: Use MultiFrame Mode with AcquisitionStart Trigger
In this example, the number of frames to be acquired is defined by AcquisitionFrameCount, and the
frame rate is defined by AcquisitionFrameRate.
Settings:
AcquisitionMode = MultiFrame
l
AcquisitionFrameCount = Any (see Limitations)
l
TriggerMode[FrameStart] = Off
l
TriggerMode[AcquisitionStart] = On
l
Limitations: For the frame count limitations, see the table above.
Example 2: Use Continuous Mode with FrameStart Trigger
In this example, the number of frames to be acquired is defined by the number of FrameStart triggers,
and the frame rate is defined by the input trigger signal's interval.
Settings:
AcquisitionMode = Continuous
l
TriggerMode[FrameStart] = On
l
Limitations: When the frame buffer is full, trigger signal inputs will be masked. If ExposureTime is
longer than BurstTrigger mode's minimum frame period, the trigger signal will also be masked.
SensorDigitizationBits
Number of Frames That Can Be Acquired
8Bits
32 frames
24 frames
16 frames
13 frames
10 frames
8 frames
- 39 -
User Manual (Ver. Preliminary) - Main Functions
is set to 10Bits, the
SensorDigitizationBits
10Bits
32 frames
19 frames
13 frames
10 frames
8 frames
7 frames
12Bits
27 frames
16 frames
11 frames
8 frames
6 frames
5 frames