IAI GOX-5105M-PGE User Manual page 90

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
TransportLayerControl Item
GevCurrentDefaultGateway
GevIPConfigurationStatus
GevPersistentIPAddress
GevPersistentSubnetMask
GevPersistentDefaultGateway
NetworkThroughput
SafetyMargin
GevIEEE1588
Related Topic: PTP
(Precision Time Protocol)
GevIEEE1588ClockAccuracy
GevIEEE1588Status
GevGVCPExtendedStatus
CodesSelector
GevGVCPExtended
StatusCodes
GevGVCPPendingAck
Step 6: Adjust the Image Quality
GevGVSPExtendedIDMode
Setting
Default Value
Range
- -
- 2:DHCP
- 192.168.0.100 Set the persistent IP address.
- 255.255.255.0 Set the persistent subnet mask.
- 0.0.0.0
10 - 100 92
0: False
0: FALSE
1: True
0 -20 19:Unknown
- -
0:Version1_1
0:Version1_1 Select the GevGVCPExtendedStatusCodes.
1:Version2_0
- -
0: Off
0: Off
1: On
0: Off
0: Off
1: On
- 90 -
User Manual (Ver. Preliminary) - Setting List
Description
Display the default gateway.
Display the current IP configuration status.
Setting Range:
0:None , 1:PersistentIP, 2:DHCP, 3:LLA, 4:ForceIP
Set the persistent default gateway.
For the configured LinkSpeed, set the limit to the bandwidth
of the stream out of the camera (%).
Caution: You can increase the frame rate by increasing this
value. However, when set to more than 92 (default), abnormal
images may be observed depending on the PC and its
environment. If this happens, set the value to the default value
(92).
TRUE : Enables PTP
FALSE: Disables PTP
Indicates clock accuracy.
Setting Range:
0:Within25ns, 1:Within100ns, 2:Within250ns, 3:Within1us,
4:Within2p5u, 5:Within10us, 6:Within25us, 7:Within100us,
8:Within250us, 9:Within1ms. 10:Within2p5ms, 11:Within10ms,
12:Within25ms, 13:Within100ms, 14:Within250ms, 15:Within1s,
16:Within10s, 17:GreaterThan10s, 18:AlternatePTPProfile,
19:Unknown, 20:Reserved
Display the IEEE 1588 Status.
1:initializing, 2:faulty, 3:disabled, 4:listening, 5:preMaster,
6:master, 7:passive, 8:uncalibrated, 9:slave
Enables the generation of extended status codes.
Enables/disables the PENDING_ACK.
Enables/disables Extended ID Mode.