Shadingcontrol - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE

ShadingControl

Configure shading correction settings.
Related Topic: Shading Correction
Shading Control Item
ShadingCorrectionMode
ShadingMode
PerformShadingCalibration
ShadingDetectResult
Setting Default
Range Value
Select the shading correction method.
0: Flat
-
0: Flat Shading
Shading
1: Color Shading (Color models only)
0: Off
1: User1
Set the area to which to save shading correction data. When this is set to Off,
0: Off
2: User2 PerformShadingCalibration will not be executed.
3: User3
Execute shading correction.
This command can not be executed under the following conditions.
- When outputting no image.
- When outputting TestPattern.
- Width and/or Height are less than 512
- In FD2x2Binning mode
- -
- In ImageScaling mode
- In Decimation mode
- In Sequencer mode
- In MultiRoi mode
- In Reverse mode
- In GradationCompression mode
- In ALC mode
Display the shading correction results.
0: Idle
1: Succeeded
2: Error1 - image was too bright
- 0: Idle
3: Error2 - image was too dark
4: Error3 - could not calibrated
5: Error4 - correction limit
6: Error5 - timeout
User Manual (Ver. Preliminary) - Setting List
Description
(ROI Function (Single
(Binning Function)
(Image Scaling Mode
(Decimation Mode)
(Sequencer Function)
(ROI Function (Multi ROI))
(Image Flip Function)
(Gradation Compression
(ALC (Automatic Level Control)
- 113 -
ROI))
(Xscale))
Mode)
Function)