IAI GOX-5105M-PGE User Manual page 95

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
Image Format Control Item
BinningVertical
ImageScalingMode
Related Topic: Image Scaling
Mode (Xscale)
ImageScalingSumMode
ImageScalingHorizontal
ImageScalingHorizontalAbs
ImageScalingVertical
ImageScalingVerticalAbs
ImageScalingBaseAbs
DecimationHorizontalMode
DecimationHorizontal
Related Topic: Decimation
Mode
DecimationVerticalMode
DecimationVertical
Related Topic: Decimation
Mode
ReverseX
Related Topic: Image Flip
Function
Setting Default
Range Value
1～ 2 1
0:Off
0:Off
1:On
0:Off (Ave)
0:Off (Ave)
1:On (Sum)
0.0625～ 1 1
256～4096 -
0.0625～ 1 1
256～ 4096 -
- 4096 (Fixed)
0: Discard
-
(Fixed)
- 1: None
0: Discard
-
(Fixed)
- 1: None
0～ 1 0
- 95 -
User Manual (Ver. Preliminary) - Setting List
Description
Set the number of pixels in the vertical direction for which to
perform binning. Monochrome models only.
Enables Image Scaling Mode.
Selects whether to use Sum or Average mode when
ImageScalingMode is On.
Specifies the horizontal scaling ratio in decimal units. For
example, if you want to scale the image by 50% in the horizontal
direction, specify "0.5".
Indicates the horizontal scaling ratio as an integer value (rounded
down to the nearest whole number). The formula is:
ImageScalingHorizontal X 4096.
Specifies the vertical scaling ratio in decimal units. For example, if
you want to scale the image by 50% in the vertical direction,
specify "0.5".
Indicates the vertical scaling ratio as an integer value (rounded
down to the nearest whole number). The formula is:
ImageScalingVertical X 4096.
Set Decimation Horizontal mode.
If set to 2, Pixels(50%) are thinned out horizontally.
1: None
2: Pixels are thinned out horizontally
Set Decimation Vertical mode.
If set to 2, Pixels(50%) are thinned out vertically.
1: None
2: Pixels are thinned out vertically.
Reverse pixels horizontally.