IAI GOX-5105M-PGE User Manual page 101

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE
Acquisition Control
Setting Range
Item
TriggerSource
1:Rising Edge
2:Falling Edge
TriggerActivation
3:Level High
4:Level Low
0: Off (fixed)
TriggerOverlap
1: ReadOut
TriggerDelay 0 - 500000
ExposureMode
0: Off
1: Timed
Related Topic:
2: TriggerWidth
Exposure Mode
ExposureTime (us)
0: Off
ExposureAuto 1:Once
2:Continuous
Default Value
- 24: Line5 Opt In
1:Rising Edge
-
0
1: Timed
- -
0: Off
User Manual (Ver. Preliminary) - Setting List
Select the trigger signal source.
7-10: PulseGenerator0-3
11-14: UserOutput0 -3
15-18: Action0-3
19:Software
24: Line5 Opt In
36: Nand0 Out
37: Nand1 Out
Select the polarity of the trigger signal (i.e., location of signal at which
trigger is applied).
Select the trigger overlap operation.
TriggerSelector(AcquisitionStart/AcquisitionEnd/AcquisitionTransferStart) =
0:Off (Fixed)
TriggerSelector(FrameStart) = 1: ReadOut
Set the time of exposure start from trigger input. (unit: μs)
Select the exposure mode.
Set the exposure time (us).
Note: The actual exposure time will consist of the image sensor's offset
duration (2.45us) added to the ExposureTime setting.
Min: 1
Max: (1/AcqusitionFrameRateMax) - Next trigger prohibited time.
Default:
GOX-5105MC-PGE: 47098
GOX-8105MC-PGE: 76482
GOX-12405MC-PGE: 113900
GOX-16205MC-PGE: 148889
GOX-20405MC-PGE: 189422
GOX-24505MC-PGE: 225724
Note: ExposureTime at the fastest FPS value when
SensorDigitizationBits=10bit, PixelFormat=8bit,
NetworkThroughputSafetyMargin=92, Packet size = 1476 Byte.
Set whether to enable auto exposure.
When set to Once, the automatic adjustment will be performed only
once, and then automatically switched to Off.
- 101 -
Description