Overlay Mode - IAI GOX-5105M-PGE User Manual

GOX-5105MC-PGE | GOX-8105MC-PGE | GOX-12405MC-PGE | GOX-16205MC-PGE | GOX-20405MC-PGE | GOX-24505MC-PGE

Overlay Mode

Related Setting Items:
Note: This function cannot be used with the
OverlayMode = MultiRoiAreaMode
In this mode, you can check the readout area when using the
is not readout is displayed with the brightness reduced to half. This makes it possible to set and adjust
the readout area while checking the target area on the screen.
Notes:
To set Overlay Mode to MultRoiAreaMode, MultiRoiMode (MultiROIControl) must be set to
l
Off in advance.
In the following scenario, OverlayMode = MultiRoiMode will be disabled (you can still set to
l
ALCAreaMode or AWBAreaMode): DecimationVertical/DecimationHorizontal = 2,
ImageScalingMode = On, BinningHorizontal = 2, BinningVertical = 2, FD2x2BinningMode =
On
OverlayMode = AWBAreaMode or ALCAreaMode
When Overlay Mode is set to AWBAreaMode or ALCAreaMode, you can check the photometry
areas of WhiteBalance and ALC. In the non-target area as shown below, the brightness is reduced to
half.
MultiRoiAreaMode
ImageFormatControl
Sequencer
User Manual (Ver. Preliminary) - Main Functions
Function.
ROI Function (Multi
AWBAreaMode or ALCAreaMode
- 67 -
ROI). The area that