Heat And Smoke Dector Installation; Wiring - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

SLC Device Installation
5.4

Heat and Smoke Dector Installation

The information in this section applies to the following models: SD505-AHS Heat Detector,
SD505-AIS Ionization Smoke Detector, and SD505-APS Photoelectric Smoke Detector.
Also see Section 5.10 for information o how to address the dectectors.
5.4.1

Wiring

1. Wire device bases as shown in Figure 5-4.
2. Set the address for each device as described in Section 5.5.
3. If you are connecting to the main panel, do not connect any devices to terminals 35 and
36. If you are connecting to the 5815XL, do not connect any devices to "SLC IN"..
Figure 5-4 Heat or Smoke Detector Connection to the FACP (Class B)
151209 5-5
firealarmresources.com