Flush Mounting - Honeywell Silent Knight IntelliKnight 5820XL Installation And Operation Manual

IntelliKnight 5820XL Installation Manual
The 5860 comes from the factory fully assembled. You must disassemble it for mounting. To
disassemble the annunciator, use a 5/64 hex wrench to remove the set screws, located on the
bottom of the annunciator bezel. (See Figure 4-11 for location of the set screws.)
Figure 4-11 Annunciator Back Box and Bezel Details

4.5.1.1 Flush Mounting

This section of the manual describes flush mounting. You can flush-mount with or without an
electrical box.
4-12
firealarmresources.com
151209